How To Program A GM Transponder key

Below Is A Video On How To Program A GM Transponder Key

 

 

If you could subscribe or like the video…. thanks. I hope this helped someone out there. If you know someone that it could help just press the share button and share it with them. Be sure to check back soon for do it yourself fixes soon.

 

 

Today we will be showing you how to program a GM transponder key. This will work on some of the 07’s that came with a transponder key and up to date. I know that it works up to 2016 as I have just programed this one in the video a 2016 GMC 2500HD truck. This should work for GM, GMC, Chevrolet, Pontiac, oldsmobile, Buick and saturn.

 

To start you will need one original already programed key. Well enter the vehicle and sit in the driver’s seat with the door closed. The next steps need to be done within 10 seconds of each other for it to successfully program the new key.

 

To start we’ll take the original key put it into the ignition and turn the key to the ON position. You will see a security light on the dash light up when you see it go out turn the key off and remove it from the ignition. Next take the new key to be programmed and insert and turn it to the ON position the security light should illuminate on the dash and when it goes out we can turn the key off and remove it.

 

Now if you have inserted and turned on and removed the original key and then inserted the new key and turned it on and removed it within 10 seconds that should have successfully programmed the new key. So next we can reinsert the new key and test it to ensure that it will start the vehicle. This one does work as it should.

 

So that’s it we have just showed you how to program a GM transponder key.

 

 

 

 

 

Disclaimer